面向产品创新的仿真建模与分析方法研究

摘要/Abstract

摘要： 为实现产品创新开发的可视化和知识获取的智能化，根据仿真目的的不同，将支持产品创新的仿真过程分为概念仿真和性能仿真2个阶段，并给出仿真模型的定义。提出了基于本构关系的概念建模方法，实现抽象模型到原理方案或结构的创新。分析了计算机辅助设计/计算机辅助工程集成环境中性能仿真模型的构造方法与过程。断路器机构的创新开发过程仿真及试验验证结果表明，概念仿真有利于将创新的设计思路转化为产品原型；性能仿真既是对原型产品性能的效验，也是获取产品创新开发知识的重要手段。

关键词: 仿真建模, 概念仿真, 性能仿真, 可视化, 产品创新, 空气断路器

Abstract: To realize visualization of product innovative development and intelligent acquisition of knowledge, according to the different purposes of simulation, the simulation process supporting product innovation was classified into two stages including conceptual simulation and performance simulation, and the corresponding simulation model was defined. The method of concept modeling based on constitution laws was put forward, and the innovation from abstract model to principle scheme or structure was implemented. The construction method and process of performance simulation modeling were analyzed under CAD/CAE integration environment. The examples of innovation development simulation and test of mechanical system for Air Circuit Breaker (ACB) were given. The results indicated that the conceptual simulation would be helpful for transforming innovative design ideas to product prototype, and the performance simulation was not only the validation for product prototype, but also the important means of acquiring knowledge on product innovation development.

Key words: simulation modeling, conceptual simulation, performance simulation, visualization, product innovation, air circuit breake

中图分类号:

TP391

唐文献，，李小宁，谢心意，管瑞良，顾建青. 面向产品创新的仿真建模与分析方法研究[J]. .

TANG Wen-xian,, LI Xiao-ning, XIE Xin-yi, GUAN Rui-liang, GU Jian-qing. Research on simulation modeling & analysis for product innovation[J]. .

参考文献

［1］ XIONG Guangleng, GUO Bin, CHEN Xiaobo, et al. Collaborative simulation & virtual prototyping［M］. Beijing: Tsinghua University Press, 2004(in Chinese).［熊光楞,郭斌,陈晓波，等. 协同仿真与虚拟样机技术［M］. 北京: 清华大学出版社, 2004.］

[2] BRACCESI C, LANDI L， SCALETTA R. New dual mesh less flexible body methodology for multi-body dynamics: Simulation of generalized moving loads［J］. Multi-body Dynamics, 2004, 218(1): 51-62.

[3] HUANG Keli, ZHANG Jinhuai, LI Jianchuan. System simulation technology［M］. Changsha: National Defence Science & Technology University Press,1998(in Chinese).［黄柯棣,张金槐,李剑川. 系统仿真技术［M］. 长沙：国防科技大学出版社,1998.］

[4] YAMIN J A. Performance simulation of a four-stroke engine with variable stroke-length and compression ratio［J］. Applied Energy,2004, 77（4）：447-463.

[5] MUKHERJEE S S，ADVE S V, AUSTIN T, et al. Performance simulation tools［J］.Computer，2002,35(2): 38-39.

[6] EBRAHIMI N D. Studies in dynamic analysis of multi-body systems［A］. 44th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials［C］.USA：American Inst. Aeronautics and Astronautics Inc.，2003.1959-1966.

[7] SPUR G，KRAUSE F L, NING Ruxin, et al. Virtual product development technology［M］.Beijing:China Machine Press,2000(in Chinese).［施普尔,克劳舍,宁汝新,等. 虚拟产品开发技术［M］.北京：机械工业出版社,2000.］

[8] TANG Wenxian. Research on product development support system for collaborative creation within KBE［D］.Shanghai:Shanghai University,2003(in Chinese).［唐文献. 面向协同创新的产品开发支持系统研究［D］.上海：上海大学，2003.］

[1]	苏珂,崔元. 面向相似认知用户集群的TRIZ超系统资源需求获取模型[J]. 计算机集成制造系统, 2021, 27(7): 2065-2077.
[2]	陈亮,吴梦婷. 智能车间质量数据集成及可视化分析平台设计[J]. 计算机集成制造系统, 2021, 27(6): 1641-1649.
[3]	马靖,王译晨,赵明,蒋增强,鄂明成,王强. 基于数字孪生的生产单元可视化管控[J]. 计算机集成制造系统, 2021, 27(5): 1256-1268.
[4]	卢山雨,刘世民,丁志昆,鲍劲松. 基于增强现实的数字孪生加工系统建模与多视图交互[J]. 计算机集成制造系统, 2021, 27(2): 456-466.
[5]	邓建新,卫世丰,石先莲,陈星雨,韦婉冬. 基于数字孪生的配送管理系统研究[J]. 计算机集成制造系统, 2021, 27(2): 585-604.
[6]	史进程,郭洪飞,张儒,姜浩,邹政伟,屈挺,许春宇,陈敏诗,何智慧,李从东,黄国全. 基于知识图谱的物联网研究文献计量分析[J]. 计算机集成制造系统, 2021, 27(1): 229-239.
[7]	徐博群,孙艳,刘肖健,卢纯福,洪滔,朱昱宁. 设计团队结构影响异步协作模式的仿真研究[J]. 计算机集成制造系统, 2020, 26(第2): 496-507.
[8]	徐泉,秦莹,初延刚,许美蓉,丁进良. 选矿生产指标可视化监控平台研究[J]. 计算机集成制造系统, 2020, 26(第1): 81-91.
[9]	肖美丹,任曼琳,徐丽娜. 双边创新信息不对称下的供应链协调激励机制[J]. 计算机集成制造系统, 2020, 26(11): 3177-3184.
[10]	李旺,王峻峰,蓝珊,李世其,焦思晨,王猛. 增强现实装配工艺信息内容编辑技术[J]. 计算机集成制造系统, 2019, 25(第7): 1676-1684.
[11]	赵浩然,刘检华,熊辉,庄存波,苗田,刘金山,王彬. 面向数字孪生车间的三维可视化实时监控方法[J]. 计算机集成制造系统, 2019, 25(第6): 1432-1443.
[12]	蹇洁,王咪琳,安世全,苏加福. 协同产品创新联盟伙伴选择决策[J]. 计算机集成制造系统, 2019, 25(第3): 752-763.
[13]	冯浩,殷晨波,贾文华,翁文文,马伟. 挖掘机器人轨迹控制及运动可视化研究[J]. 计算机集成制造系统, 2019, 25(第2): 447-453.
[14]	苏加福,杨育,张娜. 基于超网络的协同产品创新知识网络稳定性[J]. 计算机集成制造系统, 2018, 24(第12): 3082-3095.
[15]	杨天剑,孙娜. 运营商主导的手机供应链创新转型条件研究[J]. 计算机集成制造系统, 2017, 23(第9期): 2058-2067.