基于生产线仿真的工艺规划研究

摘要/Abstract

摘要： 为了满足工艺规划同后续生产环节更为紧密集成的要求，在对生产线进行分析的基础上提出了虚拟生产线集成仿真平台的思想，通过工艺与生产线的并行规划来获得优化的工艺。详细说明了集成仿真平台中的工艺规划结构和工时定额规划的方法，最终通过实例表明了生产线仿真对工艺规划的辅助作用。

关键词: 生产线仿真, 工艺规划, 工时定额规划

Abstract: In order to satisfy the requirements on closer integration of process planning and production, the idea of virtual integration platform of production line simulation was put forward based on analysis of production line, thus optimized process could be achieved by concurrent planning of process and production line. Process planning frame and man-hour planning method in integration platform were discussed in detail. Finally, an application example indicated that the production line simulation was supplementary to process planning.

Key words: production line simulation, process planning, man-hour planning

中图分类号:

TH18
TP391

赵宁，宁汝新，武志军. 基于生产线仿真的工艺规划研究[J]. .

ZHAO Ning, NING Ru-xin, WU Zhi-jun. Research on process planning based on production line simulation[J]. .

参考文献

［1］ TAN W，KHOSHNEVIS B. Integrated process planning and scheduling a mathematical programming modeling approach［D］.Los Angeles,CA,USA：University of Southern California,1997.

[2] BRANDINARTE P， CALDERINI M. A hierarchical bicriterion approach to integrated process plan selection and job shop scheduling［J］. International Journal of Production Research,1995,33(1):161-181.

[3] WU Dezhong, YAN Junqi, WANG Liya. Research of concurrent and distributed integration of CAPP and PPC［J］. Journal of Shanghai Jiaotong University,1996,30（12）:1-6(in Chinese).［吴德中,严隽琪,王丽亚. CAPP与PPC的并行分布式集成研究［J］. 上海交通大学学报,1996，３0（12）:1-6.］

[4] ZHAO Tianqi, DENG Jianchun, TONG Guofan, et al. The research on part dynamic process model based on the scheduling and controlling for FMS［J］. Chinese Mechanical Engineering,1998,9(9):36-38(in Chinese). ［赵天奇,邓建春,童国凡,等. 面向FMS生产调度和控制的零件动态工艺模型研究［J］. 中国机械工程, 1998,9(9):36-38.］

[5] WANG Shuting. Research of virtual simulation orienting production line［D］.Wuhan:Huazhong University of Science and Technology,2002(in Chinese).［王书亭. 面向生产线的虚拟仿真研究［D］.武汉：华中科技大学，2002.］

[6] ZHAO Ning, LIANG Fujun, NING Ruxin. Rapid batch changing oriented reconfigure technology of manufacturing line ［J］. Chinese Journal of Mechanical Engineering, 2004,40(11):103-106 (in Chinese).［赵宁，梁福军，宁汝新.面向快速变批量生产的生产线重构技术［J］. 机械工程学报,2004, 40(11):103-106.］

[7] EGBELU P J, TANCHOCO M A. Characterization of automated guided vehicle dispatching rules［J］. International Journal of Production Research, 1984,22(3):359-374.

[1]	李娟莉,沈宏达,谢嘉成,李梦辉,姜朔. 基于数字孪生的综采工作面工业虚拟服务系统[J]. 计算机集成制造系统, 2021, 27(2): 445-455.
[2]	窦建平,李俊,苏春. 基于可行工序序列遗传算法的工序排序优化[J]. 计算机集成制造系统, 2019, 25(第8): 1981-1990.
[3]	杜轩,潘志成. 聚类差分进化算法求解多目标工艺规划与调度集成问题[J]. 计算机集成制造系统, 2019, 25(第7): 1729-1738.
[4]	耿维忠,陈正鸣,何坤金,吴云燕. 型腔零件曲面加工特征识别方法[J]. 计算机集成制造系统, 2016, 22(第3期): 738-747.
[5]	张中伟,唐任仲,陶俐言. 非线性工艺规划的资源优化配置[J]. 计算机集成制造系统, 2016, 22(第2期): 516-528.
[6]	巴黎,李言,杨明顺,刘永,魏凡智. 考虑准时化调度的IPPS问题研究[J]. 计算机集成制造系统, 2016, 22(第10期): 2323-2332.
[7]	巴黎,李言,杨明顺,刘永. 考虑装配及运输环节的工艺计划与调度问题[J]. 计算机集成制造系统, 2015, 21(第9期): 2332-2342.
[8]	刘金锋,倪中华,刘晓军,程亚龙. 基于工艺模型的工艺信息表达与管理技术[J]. 计算机集成制造系统, 2015, 21(第7期): 1756-1763.
[9]	吕盛坪,乔立红. 工艺规划与车间调度及两者集成的研究现状和发展趋势[J]. 计算机集成制造系统, 2014, 20(2): 290-.
[10]	吕盛坪，乔立红. 工艺规划与车间调度复合式集成模型[J]. 计算机集成制造系统, 2014, 20(1): 110-.
[11]	王颂, 李云龙+, 陈富民. 基于多色集合的飞机连接装配工艺规划与资源配置[J]. , 2013, 19 (02 ): 0-0.
[12]	董亮，余剑峰，李原，王延平，张杰. 3D环境下飞机装配工艺规划与仿真一体化模型[J]. , 2012, 18(06): 0-0.
[13]	欧阳华兵,,沈斌. 面向STEP-NC基于加工特征规则聚类的零件装夹规划[J]. , 2012, 18(05): 0-0.
[14]	刘检华，万毕乐，孙刚，尚炜+，刘佳顺. 线缆虚拟布线与敷设过程仿真技术[J]. , 2012, 18(04): 0-0.
[15]	郑联语，梁大伟，雷沛. 基于STEP-NC的闭环加工技术研究与实现[J]. , 2011, 17(11): 0-0.