有固定需求底线的逆向供应链定价策略研究

摘要/Abstract

摘要： 为了解决逆向供应链中的定价策略问题，根据单一制造商和单一零售商构成的二级逆向供应链系统，应用博弈理论研究废旧产品回收数量超过或低于需求底线时，制造商和零售商的定价策略。得出了斯坦克尔伯格均衡和纳什均衡2个非合作博弈的均衡解，以及一个合作博弈的均衡解（联合定价），同时给出了各定价策略下的最优回收量。对各种定价策略作了进一步的比较，并通过案例进行了分析。

关键词: 逆向供应链, 斯坦克尔伯格均衡, 纳什均衡, 定价策略

Abstract: To deal with price decision in reverse supply chain, based on the two-level reverse supply chain that was made up of single manufacturer and single retailer, price decisions of manufacturers and retailers was studied by game theory when recycled product amount which would be higher or lower than the demand baseline . Two non-cooperative game equilibriums (Stackelberg equilibrium and Nash equilibrium) and a cooperative game equilibrium (coordination in price decision) were obtained. Meanwhile, the optimal quantity of recycled products under each price decision was given. Finally, all price decisions were compared and an illustration was given through a case study.

Key words: reverse supply chain, Stackelberg equilibrium, Nash equilibrium, price decision

中图分类号:

F224
O227

顾巧论，，季建华，高铁杠，石连栓. 有固定需求底线的逆向供应链定价策略研究[J]. .

GU Qiao-lun,，JI Jian-hua，GAO Tie-gang，SHI Lian-shuan. Research on price decision for reverse supply chain based on fixed lowest quantitative demand[J]. .

参考文献

［1］ XIA Xuhui,LIU Fei,YIN Chao,et al. Supply chain and reverse supply chain management and enterprise integration［J］. Computer Integrated Manufacturing Systems, 2003，9（8）：652-656(in Chinese).［夏绪辉，刘飞，尹超,等.供应链、逆向供应链管理与企业集成［J］．计算机集成制造系统，2003，9（8）：652-656.］

[2] GU Qiaolun,CHEN Qiushuang.Research on logistics and information network integrating remanufacturing and manufacturing system［J］.Computer Integrated Manufacturing Systems, 2004,10(7):721-726,731(in Chinese).［顾巧论，陈秋双．再制造/制造系统集成物流网络及信息网络研究［J］．计算机集成制造系统，2004,10(7):721-726,731.］

[3] CHU Hongsheng, SONG Shiji. Status and developing trends of reverse logistics［J］. Computer Integrated Manufacturing Systems, 2004，10（1）：10-14(in Chinese).［储洪胜，宋士吉．反向物流及再制造技术的研究现状和发展趋势［J］．计算机集成制造系统，2004，10（1）：10-14.］

[4] SHIH L H. Reverse logistics system planning for recycling electrical appliances and computers in Taiwan［J］. Resources, Conservation and Recycling, 2001,32(1):55-72.

[5] FLEISCHMANN M. Quantitative models for reverse logistics［D］. Netherlands，Holand: Erasmus University Rotterdam, 2001.

[6] SAVASKAN R C. Closed-loop supply chain models with product remanufacturing［J］. Management Science, 2004,50(2):239-251.

[7] YAO Weixin. Comparison of different take-back models in reverse logistics［J］.Management Sciences in China,2004,17(1):76-79,80(in Chinese).［姚卫新．再制造条件下逆向物流回收模式的研究［J］．管理科学，2004，17（1）：76-79,80.］

[8] LI S X, HUANG Z M,ASHLEY A. Seller-buyer system co-cooperation in a monopolistic market［J］. Journal of Operational Research Society,1995,46(12):1456-1470.

[9] DIANE J R,CHARLES S T. The delivery and control of quality in supplier-producer contracts［J］. Management Science,1995,41(10):1581-1589.

[10] HUANG Z M，LI S X. Co-op advertising models in manufacturer-retailer supply chains: a game theory approach［J］. European Journal of Operational Research,2001,135(3):527-544.

[11] LIM W S.A lemons market? an incentive scheme to induce truth-telling in third party logistics providers［J］. European Journal of Operational Research,2000,125(3):519-524.

[1]	易余胤,韩桂兰. 不同渠道效率下电商平台基于顾客行为的定价策略[J]. 计算机集成制造系统, 2021, 27(11): 3341-3355.
[2]	朱文兴,谢明珠,许菱. 基于双边市场理论的云制造平台定价策略[J]. 计算机集成制造系统, 2020, 26(第1): 268-278.
[3]	许民利,王竟竟. 模糊需求下基于CVaR的供应链定价与协调[J]. 计算机集成制造系统, 2020, 26(8): 2266-2277.
[4]	姚锋敏,刘珊,孙嘉轶,滕春贤. 第三方回收闭环供应链的广告与定价决策模型[J]. 计算机集成制造系统, 2019, 25(第9): 2395-2404.
[5]	胡强,曹柬,周根贵,江潇. 政府与电子产品逆向供应链激励契约设计[J]. 计算机集成制造系统, 2018, 24(第6): 1568-1578.
[6]	黄祖庆,孟丽君,张宝友,杨玉香. 基于新品价值评估可变的产品差异定价[J]. 计算机集成制造系统, 2018, 24(第3): 793-803.
[7]	郑江波,程福阳,杨柳. 基于马氏决策过程的易逝品联合策略[J]. 计算机集成制造系统, 2017, 23(第1期): 144-153.
[8]	曹建华,夏绪辉,王蕾,周文斌,刘翔. 逆向供应链服务组合与优化[J]. 计算机集成制造系统, 2017, 23(第10): 2229-2240.
[9]	李芳,单大亚,洪佳,叶春明. 不对称信息为连续类型的逆向供应链激励契约设计[J]. 计算机集成制造系统, 2016, 22(第7期): 1726-1732.
[10]	周健,石萍,唐哲宇. 基于搭便车现象的双渠道定价策略[J]. 计算机集成制造系统, 2016, 22(第4期): 1119-1128.
[11]	毕克克,牛占文,赵楠,彭巍. 基于不完全信息博弈的云制造环境下信任形成机制研究[J]. 计算机集成制造系统, 2016, 22(第1期): 95-103.
[12]	孙浩,胡劲松,王磊,钟永光,达庆利. 考虑参考效应的两期闭环供应链定价策略与回收模式比较[J]. 计算机集成制造系统, 2016, 22(第12期): 2875-2887.
[13]	顾巧论,高铁杠. 再制造逆向供应链检测误差率管理策略[J]. 计算机集成制造系统, 2016, 22(第10期): 2469-2477.
[14]	王蕾,夏绪辉,熊颖清,周敏. 逆向供应链服务及其系统体系结构[J]. 计算机集成制造系统, 2015, 21(第10期): 2720-2731.
[15]	蹇明,陈志刚. 策略性信息泄露情形下的逆向供应链回收定价策略[J]. 计算机集成制造系统, 2014, 20(08): 2000-2007.