基于混合推理的高速切削数据库系统的建立

• 论文 •

基于混合推理的高速切削数据库系统的建立

相克俊，刘战强，艾兴

山东大学机械工程学院，山东济南 250061

收稿日期:2005-01-22 修回日期:2005-03-23 出版日期:2006-03-15 发布日期:2006-03-25
基金资助:
国家自然科学基金资助项目（50375089）；霍英东教育基金资助项目（91054）；山东省自然科学基金资助项目（Y2003F06）。

Development of high-speed cutting database system based on hybrid reasoning

XIANG Ke-jun, LIU Zhan-qiang, AI Xing

Sch. of Mechanical Eng., Shandong Univ., Jinan 250061,China

Received:2005-01-22 Revised:2005-03-23 Online:2006-03-15 Published:2006-03-25
Supported by:
Project supported by the National Natural Science Foundation,China(No.50375089),the FOK Yingtung Education Foundation,China(No.91054)and the Natural Science Foundation of Shandong Province,China(No.Y2003F06).

摘要/Abstract

摘要： 高速切削包含大量相互作用的参量，详细地讨论了这些参量之间的相互关系和作用，并对工程中常用的智能方法进行了分析比较。在此基础上，提出了基于规则和实例混和推理建立高速切削数据库系统。在该系统中，实例推理起主要作用，当实例库中没有积累相关数据时，采用规则推理求解。根据各属性的特点和高速切削加工知识，确定了实例属性局部相似度的计算方法和各属性整体相似度的权值。为了快速查找实例，采用全部属性值索引和单个属性值索引两种索引方式，并采用规则推理来补充和验证实例推理的结果。规则和实例混合推理的采用，使系统的数据采集和知识更新简单易行。

关键词: 高速切削数据库, 切削实例库, 规则推理, 实例推理, 混合推理

Abstract: High-speed cutting was a complex manufacturing process with a large number of interacting variables. Relationships and interactions among these variables were discussed in detail and the existing artificial intelligence methods mainly applied in engineering were analyzed. Based on these discussions and analysis, a hybrid approach combining rule-based and case-based reasoning was presented for development of high-speed cutting database system. In the system, case-based reasoning was employed as the main problem-solving agent. Rule-based reasoning was employed whenever relevant data have not yet accumulated enough in the case base. With analysis of the characteristics of attributes and domain knowledge of high-speed cutting, the calculation methods of the local similarities of case attributes and the weight of global similarity of case attributes were provided.　In order to retrieve case quickly, two index modes were employed, namely index by values of all case attributes and index by value of single case attribute. And the result from case-based reasoning was complemented and verified by rule-based reasoning. Using hybrid reasoning in high-speed cutting database system has made data collection and knowledge update simpler and easier.

Key words: high-speed cutting database, cutting case base, rule-based reasoning, case-based reasoning, hybrid reasoning

中图分类号:

TG506
TP182

相克俊，刘战强，艾兴. 基于混合推理的高速切削数据库系统的建立[J]. .

XIANG Ke-jun, LIU Zhan-qiang, AI Xing. Development of high-speed cutting database system based on hybrid reasoning[J]. .

参考文献

［1］ DEWES R C,ASPINWALL D K. A review of ultra high speed milling of hardened steels［J］. Journal of Materials Processing Technology,1997,69(1):1-17.

[2] AI Xing. High-speed machining technology［M］. Beijing: Publishing House of National Defense Industry,2000.1-6(in Chinese).［艾兴.高速切削加工技术［M］.北京:国防工业出版社,2000.1-6.］

[3] ZHU Youwei. The application analysis of high-speed manufacturing technology［J］. Journal of Changsha University,2003,17(4):74-78(in Chinese).［朱有为.高速切削技术的应用分析［J］.长沙大学学报,2003,17(4):74-78.］

[4] ZHOU Shen. Cutting tools selection in high-speed cutting［J］.Journal of Mechanical Manufacturing and Automation,2004,33(1):18-20(in Chinese).［周慎. 高速切削中的刀具选用［J］. 机械制造与自动化,2004,33(1):18-20.］

[5] LIU Zhanqiang,AI Xing,SONG Shixue. Development and prospect of high-speed cutting technology［J］. Manufacturing Technology and Lathe,2001,(7):5-7(in Chinese).［刘战强,艾兴,宋世学.高速切削技术的发展与展望［J］.制造技术与机床,2001,(7):5-7.］

[6] AI Xing,LIU Zhanqiang,HUANG Chuanzhen,et al. Synthetic technology research on high- speed cutting［J］. Aeronautical Manufacturing Technology，2002,(3):20-23(in Chinese).［艾兴,刘战强,黄传真,等. 高速切削综合技术［J］. 航空制造技术,2002,(3):20-23.］

[7] MOOKHERJEE R,BHATTACHARYYA B. Development of an expert system for turning and rotating tool selection in a dynamic environment［J］. Journal of Materials Processing Technology,2001,113(1):306-311.

[8] LIU Zhanqiang,HUANG Chuanzhen,WAN Yi,et al. Research state and development directions of cutting database［J］.Computer Integrated Manufacturing Systems,2003,9(11):937-943(in Chinese).［刘战强,黄传真,万熠,等.切削数据库的研究现状与发展［J］.计算机集成制造系统,2003,9(11):937-943.］

[9] RIBEIRO M V,COPPINI N L. An applied database system for the optimization of cutting conditions and tool selection［J］. Journal of Materials Processing Technology，1999,93(2):371-374.

[10] CASILLAS J,CORDON O,DELJESUS M J,et al. Genetic feature selection in a fuzzy rule-based classification system learning process for high-dimensional problems［J］. Information Sciences,2001,136(1-4):135-157.

[11] GOLDING A R,ROSENBLOOM P S. Improving accuracy by combining rule-based and case-based reasoning［J］. Artificial Intelligence,1996,87(1-2): 215-254.

[12] SANTOCHI M,DINI G. Use of neural networks in automated selection of technological parameters of cutting tools［J］. Computer Integrated Manufacturing Systems,1996,9(3): 137-148.

[13] ZHAO Z X. Process planning with multi-level fuzzy decision-making［J］. Computer Integrated Manufacturing Systems,1995,8(4): 245-254.

[14] TIAN C Y,WANG P P,BAHLER D R. An application on intelligent control using neural network and fuzzy logic［J］. Neurocomputing,1996,12(4):345-363.

[15] HUANG C C,SONG T L. Rough set approach to case-based reasoning application［J］. Expert Systems,2004,26(3): 369-385.

[16] QIU M L. Design moves in situated design with case-based reasoning［J］. Design Studies,2003,24(1):1-25.

[17] YEHANTHONY G O,SHI X. Case-based reasoning in development control［J］. International Journal of Applied Earth Observation and Geoinformation,2001,3(3): 238-251.

[18] LEAKE D B,KINLEY A,WILSON D. Case-based CBR: capturing and reusing reasoning about case adaptation［J］. International Journal of Expert Systems,1997,10(2): 197-213.

[19] LIAO T W,ZHANG Z M,MOUNT C R. A Case-based reasoning system for identifying failure mechanisms［J］. Engineering Applications of Artificial Intelligence,2000,13(2): 199-213.

[20] PAJULA E,SEURANEN T,KOIRANEN T,et al. Synthesis of separation processes by using case-based reasoning［J］. Computers and Chemical Engineering,2001,25(4-6): 775-782.

[1]	胡东方,雷若楠. 基于实例推理与人工免疫系统的工程产品设计方法[J]. 计算机集成制造系统, 2018, 24(第1): 146-153.
[2]	阴艳超,丁卫刚,吴磊. 基于不确定规则推理的云制造知识服务方法[J]. 计算机集成制造系统, 2015, 21(第4期): 1114-1123.
[3]	张海光,张壮雅,胡庆夕. 真空注型智能质量控制方法及系统实现[J]. 计算机集成制造系统, 2014, 20(10): 2542-2550.
[4]	邓朝晖,，唐浩，刘伟，万林林，曹德芳，张晓红，曾宇. 凸轮轴数控磨削工艺智能应用系统研究与开发[J]. , 2012, 18(08): 0-0.
[5]	欧彦江，，殷国富,周长春. 基于实例推理的组合夹具自动拼装技术[J]. , 2011, 17(11): 0-0.
[6]	孟秀丽,. 基于实例的计算机辅助装配过程设计[J]. , 2010, 16(11): 0-0.
[7]	毕鲁雁，焦宗夏，范圣韬，康荣杰. 基于本体映射的设计知识库搜索方法[J]. , 2009, 15(10): 0-0.
[8]	宋欣，郭伟，王志勇. 基于实例推理的可倾瓦推力轴承方案设计[J]. , 2009, 15(08): 0-0.
[9]	武守飞，潘晓弘，张勇，吴鹏程. 面向大批量定制的设计重用支撑平台研究[J]. , 2009, 15(02): 0-0.
[10]	张旭堂,，侯鑫，金天国. 集成形状比较技术的产品实例检索研究[J]. , 2009, 15(01): 0-0.
[11]	周江奇，练朝春，姚佐平，黄玮，林忠钦，朱文峰. 实例推理技术在解决车身制造问题中的应用[J]. , 2008, 14(05): 0-0.
[12]	周鸿波，钟崴，吴燕玲，童水光. 基于实例推理的电站锅炉方案设计技术[J]. , 2008, 14(01): 0-0.
[13]	李辉, ，李向阳, ，孙洁, . 供应链伙伴关系诊断管理研究[J]. , 2007, 13(10): 0-0.
[14]	蒋占四，陈立平，罗年猛. 最近邻实例检索相似度分析[J]. , 2007, 13(06): 0-0.
[15]	麻芳兰,,何玉林,李尚平,苗剑. 摩托车智能设计实例推理系统的索引模型[J]. , 2006, 12(09): 0-0.