基于Java 3D的熔融沉积模型快速成型机的远程监控系统

• 论文 •

基于Java 3D的熔融沉积模型快速成型机的远程监控系统

王群，任乃飞，陈小亮

江苏大学数字化制造技术研究所，江苏镇江 212013

收稿日期:2005-03-04 修回日期:2005-04-20 出版日期:2006-05-15 发布日期:2006-05-25
基金资助:
江苏省汽车工程重点实验室开放基金资助项目（KJS02078）。, Project supported by the Jiangsu Key Mobile Lab Open Fund,China(No.KJS02078).

Java3D-based remote monitoring system for FDM rapid prototype machine

WANG Qun,REN Nai-fei,CHEN Xiao-liang

Inst. of Digital Manufacturing Tech.,Jiangsu Univ.,Zhenjiang 212013,China

Received:2005-03-04 Revised:2005-04-20 Online:2006-05-15 Published:2006-05-25

摘要/Abstract

摘要： 为了满足网络化协作制造对现场物理设备实时准确的监控要求，通过分析熔融沉积模型快速成型机的工作特征，设计了远程监控系统的框架，完成了快速成型机在Java 3D中的建模。提出了3D模型依据设备端应用服务器传输的相应传感器信号数据进行运动仿真，达到客户端对远端熔融沉积模型快速成型机远程监控的目的。

关键词: 远程监控, 3维模型, 传感器信号

Abstract: To satisfy the real-time monitoring requirements for site devices in Web-based manufacturing environment,by conducting working characteristics analysis on Fused Deposition Modeling (FDM) rapid prototype machine,a novel remote monitoring system framework was presented. Instead of using a camera,the FDM rapid prototype machine was modeled by Java 3D. A project was introduced to solve the problem of the model motion simulation based on the sensor signal data which was transformed from the application server so as to meet the requirements of remote real-time monitoring.

Key words: remote monitoring, Java 3D model, sensor signal, motion simulation

中图分类号:

TP393.4

王群，任乃飞，陈小亮. 基于Java 3D的熔融沉积模型快速成型机的远程监控系统[J]. .

WANG Qun,REN Nai-fei,CHEN Xiao-liang. Java3D-based remote monitoring system for FDM rapid prototype machine[J]. .

参考文献

［1］ DU Zhihui,LIU Peng,CHEN Yu，et al.Java 3D programming practice［M］.Beijing:Tsinghua University Press，2002（in Chinese）.［都志辉，刘鹏，陈渝，等.Java 3D编程实践［M］.北京：清华大学出版社，2002.］

[2] TENG Fei,WANG Changhong,WANG Yufeng，et al.Remote control system based on Internet［J］.Computer Integrated Manufacturing Systems,2004,10(1):195-200(in Chinese).［腾飞，王常虹，王玉峰,等.利用Java和 Web构建给予互联网的远程控制系统［J］.计算机集成制造系统，2004,10(1)：195-200.］

[3] YUAN Chuming,ZHANG Guohui,CHEN Youping，et al.Web-based remote control on Open NC machine［J］.Manufacturing Automation,2004,26(3):36-39(in Chinese).［袁楚明，张国辉，陈又平，等.基于Web的开放式数控设备远程监控技术研究［J］.制造业自动化，2004,26(3)：36-39.］

[4] KANG Yingying,XI Juntong,YAN Junqi.Remote monitoring & diagnosis of breaking-down fault for FDM rapid prototype machine［J］.Computer Integrated Manufacturing Systems,2003,9(9):771-775(in Chinese).［亢英英，习俊通，严隽琪.FDM快速成型机停动运行状态的远程监测［J］.计算机集成制造系统，2003,9(9):771-775.］

[5] WANG L H，ORBAN P，CUNNINGHAM A,et al.Remote real-time CNC machining for Web-based manufacturing［J］.Robotics and Computer-Integrated Manufacturing,2004,20(3)：563-571.

[6] WANG L H，SAMS R，VERNET M,et al.Intergrating Java 3D model and sensor data for remote monitoring and control［J］.Robotics and Computer-Integrated Manufacturing,2003,19(2)：13-19.

[7] WEN Jinghua,LI Xiang.Modeling and telecontrol of industrial robot base on Java 3D［J］.Computer System Application,2004,10(10):70-72(in Chinese).［文静华，李祥.基于Java 3D的工业机器人建模和远程控制［J］.计算机系统应用，2004,10(10)：70-72.］

[1]	曹大理,孙惠斌,张纪铎,莫蓉. 基于卷积神经网络的刀具磨损在线监测[J]. 计算机集成制造系统, 2020, 26(第1): 74-80.
[2]	王明微,周竞涛,敬石开,田国良. 基于贝叶斯网络的切削加工表面粗糙度在线监测方法[J]. 计算机集成制造系统, 2014, 20(12): 3075-3081.
[3]	刘伟军，张嘉易，. 层切法模具粗加工中自适应刀轨规划方法[J]. , 2005, 11(09): 0-0.
[4]	朱晓明，王永章，富宏亚，陈昭会. 基于网络的纤维缠绕机远程监控关键技术研究[J]. , 2005, 11(02): 0-0.