基于设计结构矩阵的模块化产品族设计方法研究

摘要/Abstract

摘要： 为解决产品族设计中的模块化和核心平台的确定问题，本文针对产品族的产品相似性和零部件的可替换性等特点，从功能和结构两个层次进行界面关联并构建量化的设计结构矩阵，然后进行信息处理和部件的敏感性分析。通过部件之间关联信息量及其比例的分析，规划了产品族开发顺序，从任务聚合的角度实现部件聚合。综合考虑两种层次的界面关联分析，在实现产品族模块化的基础上确定了核心平台。最后，以咖啡机为例说明了上述方法。

关键词: 设计结构矩阵, 产品族, 模块化, 界面关联分析

Abstract: In order to determine the product platform and modularize for product family design, the quantified Design Structure Matrix (DSM) is constructed based on the functional and structural interface relations analysis, which is aimed at the commonality and replaceable characteristics of product family, then the relations information is handled and sensitivity analysis is applied. Secondly, components clustering is achieved by utilizing product family design sequence, which is programmed based on the analysis of the information capacity and proportion between components. And then the product platform is realized based on the modularized product family by synthetically considering above two layers interface relations. Finally, the coffeemaker is used to illustrate the design methodology.

Key words: design structure matrix, product family, modular, interface relations analysis

中图分类号:

TP12

王爱民，孟明辰，黄靖远. 基于设计结构矩阵的模块化产品族设计方法研究[J]. .

WANG Ai-min, MENG Ming-chen, HUANG Jing-yuan. Modular Product Family Design Methodology Based on Design Structure Matrix[J]. .

参考文献

［1］TSENG M M, JIAO Jianxin. Design for mass customization by developing product family architecture[A]. Proceedings of ASME Design Engineering Technical Conferences[C]. Altanta, Georiga: ASME Press, 1998.1-19.

[2]YIN Xiangyang, TONG Bingshu, LI Heliang， et al. Review on design for mass customization[J]. Mechanical Science and Technology, 2001, 20(1):19-23(in Chinese).[阴向阳，童秉枢，李和良，等.大批量定制设计研究现状[J].机械科学与技术，2001, 20(1): 19-23].

[3]MARTIN M V.Design for variety: a methodology for developing product platform architectures[D]. Stanford: Stanford University Press,1999.

[4]MORENO M. Introducing a platform strategy in product development[J].Intl Jour. Production Economics, 1999, 60-61：145-153.

[5]TATIKONDA M V. An empirical study of platform and derivative product development projects[J].Jour. Prod Innov Mana, 1999, 16(1):3-26.

[6]GONZALEZ-ZUGASTI J P. Modular platform-based product family design[A]. Proceedings of Design Engineering Technical Conferences[C]. Baltimore: ASME Press, 2000.1-15.

[7]DONG Ming, CHA Jianzhong, GUO Wei. Tasks organization in concurrent engineering[J]. System Engineering Theory and Application,1996,16(8):69-78(in Chinese).[董明，查建中，郭伟.并行工程的任务组织[J].系统工程理论与实践，1996,16(8）：69-78].

[8]BROWNING T R. Applying the design structure matrix to system decomposition and integration problems:a review and new directions[J]. IEEE Transactions on Engineering Management,2001, 48(3): 292-306.

[9]Sundgren Niklas. Introducing interface management in new product family development[J].The Journal of Product Innovation Management, 1999,16(1): 40-51.

[10]GEBALA D A， STEVEN D，et al. Methods for analyzing design procedures[A]. Proceedings of the ASME Third International Conference on Design Theory and Methodology[C]. Atlanta, CA: ASME Press, 1991.227-233.

[1]	张英英,夏一,杜纲. 产品族配置与考虑升级的再制造设计主从关联优化[J]. 计算机集成制造系统, 2021, 27(7): 2053-2064.
[2]	宋思蒙,蒋增强,马靖,王强,赵志彪. 基于数字孪生的模块化生产系统运行机制及重构方法[J]. 计算机集成制造系统, 2021, 27(2): 510-520.
[3]	乐万德,任静,刘舟洲,杨楠,初建杰. 频谱基因控制的概念产品族设计[J]. 计算机集成制造系统, 2021, 27(11): 3273-3281.
[4]	程贤福,万冲,邱浩洋,万丽云. 模块化产品设计中模块间的关联分析与解耦策略[J]. 计算机集成制造系统, 2020, 26(第4): 1043-1051.
[5]	许静,周磊,陈平录,刘木华. 基于数字孪生的模块粒度优化分析方法[J]. 计算机集成制造系统, 2019, 25(第6): 1419-1431.
[6]	肖文星,杜纲. 协同产品模块化架构与生态升级设计的主从关联优化[J]. 计算机集成制造系统, 2019, 25(第5): 1128-1141.
[7]	张英英,杜纲. 考虑再制造的产品族配置主从关联优化[J]. 计算机集成制造系统, 2018, 24(第6): 1511-1521.
[8]	陈健,莫蓉,初建杰,刘敬,吴林健. 工业设计云服务平台协同任务模块化重组与分配方法[J]. 计算机集成制造系统, 2018, 24(第3): 720-730.
[9]	阴艳超,常斌磊,姬常杰. 转轮叶片多轴铣削加工的集成知识云服务实现[J]. 计算机集成制造系统, 2018, 24(第2): 349-360.
[10]	杜纲,张铁斌,缪琛璐,马爽. 产品族模块化设计与平台配置的主从关联优化[J]. 计算机集成制造系统, 2018, 24(第2): 455-463.
[11]	张卫,冷建兴,张广博,唐任仲,方水良. 基于自组织映射网络的制造服务模块动态创建方法[J]. 计算机集成制造系统, 2017, 23(第8期): 1765-1773.
[12]	盛步云,汪星刚,萧筝,舒瑶,黄培德,邓璘,殷希彦. 基于客户需求分析的模块化产品配置方法[J]. 计算机集成制造系统, 2017, 23(第10): 2091-2100.
[13]	王蕾,夏绪辉,熊颖清,周敏. 再制造服务资源模块化方法及应用[J]. 计算机集成制造系统, 2016, 22(第9期): 2204-2216.
[14]	韩振宇,金鸿宇,富宏亚. 基于ESPRIT频谱估计和隐马尔可夫模型的铣削颤振辨识系统建模[J]. 计算机集成制造系统, 2016, 22(第8期): 1937-1944.
[15]	王丹萍,杜纲. 基于工艺多样性的产品族配置主从优化[J]. 计算机集成制造系统, 2016, 22(第7期): 1636-1644.