| [1]DAI Xiaohua, WANG Wen, WANG Wei，et al. A summary of the study on open system[J]. Modular Machine Tool & Automatic Manufacturing Technique,2000,(11): 1-2(in Chinese). [戴晓华,王文,王威，等.开放式数控系统研究综述[J].组合机床和自动化加工技术，2000, (11):1-2.]
[2]ZHOU Ji, ZHOU Yanhong，et al. The process technology of CNC[M]. Beijing: National Defence Industry Press, 2002(in Chinese). [周济,周艳红，等.数控加工技术[M].北京：国防工业出版社, 2002.]
[3]HAN Quanli, MA Hongwei, ZHANG Bin,et al. The open NC system[J]. Machine Design and Manufacturing Engineering，2001,(1):4-5（in Chinses）.[韩权利,马宏伟,张斌,等.开放式数控系统[J].机械设计与制造工程,2001(1): 4-5.]
[4]ZHUO Guirong, WANG Zhixing,LIU Wentao,et al. The CNC software development of parallel kinematics machine[J].China Mechanical Engineering, 2002,13(12): 1025-1027, 1037(in Chinese). [卓桂荣,王知行,刘文涛,等.并联机床数控系统软件开发［J］.中国机械工程, 2002,13(12): 1025-1027,1037.]
[5]PAN Aimin. The theroy and application of COM[M]. Beijing:Tsinghua University Press,1999(in Chinese).[潘爱民.COM原理与应用[M].北京:清华大学出版社,1999.]
[6]ZHANG Yunpo, ZHU Zhihong, TANG Xiaoqi,et al. Research of open CNC system architecture based on COM technology [J]. Machinery & Electronics,2001,(5):39-40. [张运坡,朱志宏,唐晓琪，等.基于COM技术的开放性数控系统的研究[J].机械与电子,2001, (5):39-40.]
[7]WANG Wen, WANG Wei, DAI Xiaohua,et al. Study of re_configurable CNC system based on component object model standard[J]. Journal of Computer-Aided Design & Computer Graphics , 2001,13(8):718-723(in Chinese). [王文,王威,戴晓华，等.基于COM标准的可重构数控系统的研究[J].计算机辅助设计与图形学学报，2001,13(8): 718-723.]
[8]GUO Changwang, ZHU Guoli, GONG Shihua，et al.Open system NC based on software comonent technology[J]. Journal of Huazhong University of Science and Technology,2000，(7):38-40(in Chinese). [郭长旺,朱国力,龚时华，等.基于组件技术的开放式数控系统的研究[J].华中理工大学学报, 2000，(7): 38-40.]
|
