直线轴和旋转轴联动时的轮廓误差耦合控制方法

• 论文 •

直线轴和旋转轴联动时的轮廓误差耦合控制方法

赵国勇,赵玉刚,王士军

山东理工大学精密制造与特种加工省级重点实验室

收稿日期:2013-11-25 修回日期:2013-11-25 出版日期:2013-11-25 发布日期:2013-11-25

Contour error coupled-control approach for linked linear axis and rotation axis

ZHAO Guo-yong,ZHAO Yu-gang,WANG Shi-jun

Shandong Provincial Key Laboratory of Precision Manufacturing and Non-traditional Machining,Shandong University of Technology

Received:2013-11-25 Revised:2013-11-25 Online:2013-11-25 Published:2013-11-25

摘要/Abstract

摘要： 为了提高机床的轮廓精度,研究了直线轴和旋转轴联动时的轮廓误差耦合控制方案,提出在空间直角坐标系下进行轮廓误差的描述和计算,再转化到机床坐标系下进行轮廓误差补偿控制;研究了一种“二点中值法”轮廓误差计算模型,并研究了轮廓误差补偿量计算方法。在数控实验台上驱动X直线轴和A旋转轴,跟踪一段直动从动件圆柱凸轮轮廓线刀具轨迹,对比试验表明所提方法可有效提高轮廓精度。

关键词: 旋转轴, 轮廓误差计算模型, 耦合控制, 机床坐标系

Abstract: To improve the contour accuracy of machine tools,the contour error coupled-control scheme for linked linear axis and rotation axis was developed,and the contour error under space rectangular coordinate was described and computed which transformed to machine tools coordinate to compensate contour error.Moreover,a two-point median method contour error computing model and contour error compensated quantity computing method were researched.A straight moving follower column cam profile cutter path was tracked on a numerical control table with linked X linear axis and A rotation axis.The experiment results showed that the developed approach could improve contour accuracy effectively.

Key words: rotation axis, contour error computing model, coupled-control, machine tools coordinate, contour accuracy

中图分类号:

TH13

赵国勇,赵玉刚,王士军. 直线轴和旋转轴联动时的轮廓误差耦合控制方法[J]. .

ZHAO Guo-yong,ZHAO Yu-gang,WANG Shi-jun. Contour error coupled-control approach for linked linear axis and rotation axis[J]. .

参考文献

［1］KIM B S,RO S K,PARK J K.Development of a 3-axis desktop milling machine and a CNC system using advanced modern control algorithms［J］.International Journal of Precision Engineering and Manufacturing,2010,11(1):39-47.
[2]BI Lei,XIAO Benxian,YU Haibin,et al.Contour error compensating method based on linear exponential smoothing model prediction technique［J］.Journal of Hefei University of Technology,2010,33(8):1166-1170 (in Chinese).［毕磊,肖本贤,于海滨,等.基于一次指数平滑模型预测的轮廓误差补偿方法［J］.合肥工业大学学报,2010,33(8):1166-1170.］
[3]CONWAY J R,ERNESTO C A,FAROUKI R T.Performance analysis of cross-coupled controllers for CNC machines based upon precise real-time contour error measurement［J］.International Journal of Machine Tools and Manufacture,2012,52(1);30-39.
[4]ALTINTAS Y,SENCER B.High speed contouring control strategy for five-axis machine tools［J］.CIRP Annals-Manufacturing Technology,2010,59(1):417-420.
[5]WANG Bo,LIANG Yingchun,DONG Shen.Fuzzy contour control strategy for the ultra precision machine tool［J］.Journal of Harbin Institute of Technology,2005,37(6):830-832 (in Chinese).［王波,梁迎春,董申.超精密机床模糊轮廓控制技术研究［J］.哈尔滨工业大学学报,2005,37(6):830-832.］
[6]LI Xiaoli,CHEN Wei,YAN Rong.Adaptive compensation of contour errors based on BP neural networks［J］.China Mechanical Engineering,2010,21(16):1902-1906 (in Chinese).［李小力,陈威,闫蓉.基于ＢＰ神经网络的空间轮廓误差自适应补偿［J］.中国机械工程,2010,21(16):1902-1906.］
[7]HUO Feng,XI Xuecheng,POO A N.Generalized taylor series expansion for free-form two-dimensional contour error compensation［J］.International Journal of Machine Tools and Manufacture,2012,53(1):91-99.
[8]PENG C C,CHEN C L.Biaxial contouring control with friction dynamics using a contour index approach［J］.International Journal of Machine Tools and Manufacture,2007,47(10):1542-1555.
[9]CHENG Mingyang,SU K H,WANG Shufeng.Contour error reduction for free-form contour following tasks of biaxial motion control systems［J］.Robotics and Computer-Integrated Manufacturing,2009,25(2):323-333.
[10]WANG Baoren,WANG Jie,ZHANG Chengrui,et al.Contour error vector model and its application to CNC systems［J］.Computer Integrated Manufacturing Systems,2010,16(7):1401-1407 (in Chinese).［王宝仁,王婕,张承瑞,等.数控系统轮廓误差矢量模型及其应用［J］.计算机集成制造系统,2010,16(7):1401-1407.］
[11]GONG Shihua,HUANG Yu.Adaptive control of cam contour error in camshaft grinding process［J］.Electrical Automation,2010,32(4):11-13 (in Chinese).［龚时华,黄禹.凸轮轴磨削加工轮廓误差的自适应控制［J］.电气自动化,2010,32(4):11-13.］
[12]LIU Defu,PAN Jinping,ZHOU Xian.Key problems in CNC machining of barrel cam［J］.Journal of Mechanical Transmission,2003,27(3):53-55 (in Chinese).［刘德福,潘晋平,周贤.圆柱凸轮数控加工的几个关键问题［J］.机械传动,2003,27(3):53-55.］

[1]	彭宝营,蔡力钢,韩秋实,杨庆东,李启光. X-C直驱平台平面曲线轮廓磨削廓形误差非线性耦合控制[J]. 计算机集成制造系统, 2014, 20(2): 371-.
[2]	赵国勇，赵玉刚. 基于曲线插补的多轴联动交叉耦合控制方法[J]. , 2011, 17(09): 0-0.
[3]	王宝仁，王婕，张承瑞，武洪恩. 数控系统轮廓误差矢量模型及其应用[J]. , 2010, 16(07): 0-0.