再制造/制造系统集成物流网络及信息网络研究

摘要/Abstract

摘要： 在再制造与制造集成系统中，传统的物流网络不再适用。为了解决该问题，研究了再制造/制造系统物流网络的结构，给出了其物流网络的混合整数规划模型，并通过案例进行了分析。该模型特点是：网络结构为闭环网络；正身物流中统筹考虑再生品和新产品的物流分配，再生产和新产品可以相互替代同时，基于Internet/Intranet/Extranet技术，探讨了对再制造/制造系统物流网络的运行具有重要作用的信息系统的组成。

关键词: 再制造, 物流网络, 信息网络

Abstract: The conventional logistic network is not suitable for Remanufacturing/Manufacturing(R/M) system. In order to solve the problem, the logistic network of R/M system was studied, and a location-allocation model for the logistic network of R/M system was presented. An illustration was given through a case study. The characteristics of the model were as following: the structure was a closed-loop network considering the logistic distribution of regenerative products and new products that can be replaced by each other in the forward logistic. The information network for R/M system was also probed based on Internet/Intranet/Extranet technology.

Key words: remanufacturing, logistic network, information network

中图分类号:

TH16
O21

顾巧论，，陈秋双. 再制造/制造系统集成物流网络及信息网络研究[J]. .

GU Qiao-lun,，CHEN Qiu-shuang. Research on logistics and information network integrating remanufacturing and manufacturing system[J]. .

参考文献

[1]FLEISCHMANN M，et al. Quantitative models for reverse logistics:a review[J]. European Journal of Operational Research,1997,103（1）:1-17.

[2]XIA Shouchang,XI Lifeng. Research of remanufacturing logistics networks:its status quo and development trend[J].Industrial Engineering and Management,2002,7（5）:20-23(in Chinese). [夏守长，奚立峰.再制造物流网络的研究现状及发展趋势[J].工业工程与管理,2002,7（5）:20-23.]

[3]SHIH L H. Reverse logistics system planning for recycling electrical appliances and computers in Taiwan[J]. Resources, Conservation and Recycling, 2001,32（1）:55-72.

[4]GUIDE V D R，JAYARAMAN V，SRIVASTAVA R，et al. Supply-chain management for recoverable manufac -turing systems[J].Interfaces,2000,30(3):125-142.

[5]FLEISCHMANN M.Quantitative models for reverse logistics[D]. The Netherlands: Erasmus University Rotterdam, 2001.

[6]LAAN van der E,SALOMON M.Production planning and inventory control with remanufacturing and disposal[J]. European Journal of Operational Research,1997,102(2):264-278.

[7]KIESMULER D P, LAAN van der E. An inventory model with dependent product demands and returns[J]. Intenational Journal Production Economics,2001,72(1):73-87.

[8]GUIDE Jr,DANIEL V R. Production planning and control for remanufacturing: industry practice a栀湩??????????nd research needs[J]. Journal of Operations Management,2000,18(4):467-483.

[9]RICHTER K,SOMBRUTZKI M. Remanufacturing planning for the reverse Wagner/Whitin models[J].European Journal of Operational Research,2000,121(2):304-315.

[10]GU Qiaolun,CHEN Qiushuang. Model design for remanufacturing logistics network[A].Proceeding of the 22nd Chinese Control Conference［C］.Wuhan：Wuhan University of Institute Technology Press，2003.463-466(in Chinese). [顾巧论，陈秋双．再制造物流网络模型设计[A]．第二十二届中国控制会议论文集［C］.武汉：武汉理工大学出版社，2003.463-466.]

[1]	高鹏,杜建国,陆玉梅,朱宾欣. 政府再制造补贴对独立再制造商市场进入及产品质量决策的影响[J]. 计算机集成制造系统, 2021, 27(8): 2426-2436.
[2]	张英英,夏一,杜纲. 产品族配置与考虑升级的再制造设计主从关联优化[J]. 计算机集成制造系统, 2021, 27(7): 2053-2064.
[3]	张雪梅,周根贵,曹柬. 考虑政府规制和供应链协调的再制造微分博弈模型[J]. 计算机集成制造系统, 2021, 27(7): 2095-2111.
[4]	杨泽青,王春方,彭凯,刘丽冰,张亚彬. 基于深度支持向量机的曲轴智能识别方法[J]. 计算机集成制造系统, 2021, 27(6): 1629-1640.
[5]	王子生,姜兴宇,刘伟军,石敏煊,杨世奇,杨国哲. 再制造机床装配过程误差传递模型与精度预测[J]. 计算机集成制造系统, 2021, 27(5): 1300-1308.
[6]	杜彦斌,吴国奥,许磊. 基于神经网络和再制造因子的再制造机床可靠性分配方法[J]. 计算机集成制造系统, 2021, 27(4): 1052-1061.
[7]	王忠伟,尹谦,庞燕,邢立宁,任腾. 再制造闭环供应链回收问题研究进展[J]. 计算机集成制造系统, 2021, 27(4): 1201-1210.
[8]	姚君,陈东彦. 基于市场努力与再制造过程创新的闭环供应链定价及协调策略[J]. 计算机集成制造系统, 2021, 27(11): 3329-3340.
[9]	何娟,黄福玲,陈彦如,雷倩. 平行进口商市场入侵条件下第三方再制造影响[J]. 计算机集成制造系统, 2021, 27(1): 284-295.
[10]	王亚东,石全,宋卫星,胡起伟. 动态物流网络多目标优化模型及求解算法[J]. 计算机集成制造系统, 2020, 26(第4): 1142-1150.
[11]	司凤山,王晶,戴道明. 基于制造商回收的双渠道闭环供应链博弈分析[J]. 计算机集成制造系统, 2020, 26(第3): 849-859.
[12]	宋守许,邱权,卜建,柯庆镝. 基于疲劳与磨损的曲轴主动再制造时机选择[J]. 计算机集成制造系统, 2020, 26(第2): 279-287.
[13]	陈信同,李帮义,王哲,魏杉汀. 政府率规制对再制造竞争的影响[J]. 计算机集成制造系统, 2020, 26(第2): 522-530.
[14]	高攀,丁雪峰,覃若兰. 资金约束条件下再制造商的融资策略研究[J]. 计算机集成制造系统, 2020, 26(第1): 240-249.
[15]	高鹏,杜建国,聂佳佳,陆玉梅. 消费者后悔预期对再制造供应链运作模式的影响[J]. 计算机集成制造系统, 2020, 26(5期): 1434-1444.