支持产品复用的集成产品开发研究

• 论文 •

支持产品复用的集成产品开发研究

陈满意，陈定方，吴定川

1.华中科技大学机械科学与工程学院国家数控系统工程技术研究中心，湖北武汉430074；2.武汉理工大学物流工程系，湖北武汉430063；3.武汉钢铁集团机械制造公司，湖北武汉430083

出版日期:2004-12-15 发布日期:2004-12-25

Research on integrated product development environment supporting product design reuse

CHEN Man-yi, CHEN Ding-fang, WU Ding-chuan

1.State Numerical Control Eng. Research Cent., Sch. of Mechanical Eng.，Huazhong Univ. of S&T, Wuhan430074,China;2.Dep. of Logistics, Wuhan Univ. of Tech., Wuhan430063,China;3.Mechanical Manufacturing Corp., Wuhan Iron & Steel (Group) Corp., Wuhan430083,China

Online:2004-12-15 Published:2004-12-25

摘要/Abstract

摘要： 企业在长期的生产活动中积累了大量宝贵的产品资源。如何有效利用这些产品资源是缩短产品开发周期、提高产品质量以及实现对市场的快速响应的关键。将基于实例的推理技术引入产品数据管理，提出一种基于产品数据管理的支持产品复用的集成产品开发环境结构；针对产品属性的特点，提出一种新的实例检索模型，并给出相应算法；为了实现基于实例的设计系统与产品数据管理系统之间的数据交流，开发了两者之间的数据接口；以某钢厂典型产品开卷机为对象，开发了SmarTeam环境下的开卷机集成设计系统。该系统能够有效地支持对现有产品资源的复用，缩短开发周期，提高设计质量。研究成果可以推广应用至其他典型产品。

关键词: 产品复用, 基于实例的设计, 集成产品开发环境, 开卷机

Abstract: The numbers of product design are increasing with development of enterprises. How to efficiently utilize these product resources is a crucial successful factor for those enterprises which aim at shortening product development cycle, improving product quality and quick response to market. At first, the architecture of integrated product development environment supporting product design reuse was constructed through combining case-based reasoning with product data management system. According to the characteristics of the product properties, which were either a value or a range, a new case-retrieving model and its algorithm were presented. In order to conduct product data exchange between case-based design system and product data management system, an interface between them was developed through SmarTeam Application Programming Interface (API). At last, with the strip steel coiler, the important equipment of strip steel mill was introduced as an application example, an integrated product development environment based on SmarTeam was developed. The system was practical and useful for reuse of product design resources, and shortened the product development cycle and improvement of product quality.

Key words: product reuse, case-based design, integrated product development environment, strip steel coiler

中图分类号:

TP39

陈满意，陈定方，吴定川. 支持产品复用的集成产品开发研究[J]. .

CHEN Man-yi, CHEN Ding-fang, WU Ding-chuan. Research on integrated product development environment supporting product design reuse[J]. .

参考文献

［1］JIANG Li,HE Zhijun,SUN Shouqian.A knowledge processing model for product variant design[J].Chinese Journal Computers, 1998,21(S1):369-374(in Chinese).[江力,何志均,孙守迁.一个面向产品变型设计过程的知识处理方法模型[J].计算机学报, 1998,21（增刊）:369-374.]

[2]ZHONG Tingxiu.Rapid response engineering and rapid product design strategy[J]. Machine Design and Research, 1999,15(1):9-12(in Chinese).[钟廷修.快速响应工程和快速产品设计策略[J].机械设计与研究,1999,15(1):9-12.]

[3]ZHONG Tingxiu.Theory and method of rapid response product design[J]. Hydraulics Pneumatics & Seals,2000,(2):4-7(in Chinese).[钟廷修.快速响应设计的理论和方法[J].液压气动与密封, 2000,(2):4-7.]

[4]CHEN Manyi, CHEN Dingfang. Study on integrated design system of mechanic products oriented on rapid response engineering[J].Journal of Wuhan University of Technology(Sci &Tech), 2002,24(11):80-82,86(in Chinese).[陈满意,陈定方.面向快速响应的机械产品集成设计系统的研究［J］.武汉理工大学学报（自然科学版），2002,24(11):80-82,86.]

[5]SLONIM T Y,SCHNEIDER M. Design issues in fuzzy case-based reasoning[J]. Fuzzy Sets and Systems,2001,117（2）:251-267.

[6]MAHER M L, Andrés Gmes de Silva Garza. Case-based reasoning in design[J]. IEEE Expert,1997，12（2）:34-41.

[7]MOORE C J，LEHANE M S. Development of a case representation strategy for a bridge design case base［J］.Engineering Structures,1999,21(3):219-231.

[8]CHEN Manyi, CHEN Dingfang, WU Dingchuan. The use of case-based reasoning for design support of planar double-enveloping worm gearing[A].Mechanical-Electronic Engineering and Computer Application[C].Moscow，Russia:Stankin Publishing House,2002.45-50.