多学科多目标评价及其在电静液作动系统中的应用

摘要/Abstract

摘要： 为进行新型机载电静液作动系统方案的评价，提出了一种机电一体化产品方案设计的综合评价方法。该方法综合运用多学科优化设计和质量功能部署技术，引入了系统设计结构矩阵和部件参数关系矩阵的概念，设计了基于多学科、多目标的综合评价函数，并结合两种实际的机载电静液作动系统方案及其主要参数，得出了与实际情况吻合的综合评价结果。该方法在产品设计和方案评价中具有良好的应用价值。

关键词: 多学科优化设计, 质量功能部署, 多目标函数, 综合评价, 机载作动系统, 电静液作动器

Abstract: To evaluate the schemes of innovative Electro-Hydrostatic Actuation (EHA) systems, a comprehensive assessment method of mechatronic products design-scheme was presented. Combining Multidisciplinary Design Optimization and Quality Function Deployment, the Design Structure Matrix and Component Parameters Relation Matrix of system were put forward. Then a comprehensive function based on multidisciplinary and multi-objective functions was designed. It achieved the comprehensive assessment result fit close to the practical situation of the two EHA schemes.

Key words: multidisciplinary design optimization, quality function deployment, multi-objective functions, comprehensive assessment, aircraft actuation system, electro-hydrostatic actuator

中图分类号:

李军，付永领. 多学科多目标评价及其在电静液作动系统中的应用[J]. .

LI Jun, FU Yong-ling. Comprehensive assessment method using multi-disciplinary & multi-objective functions with its applic[J]. .

参考文献

［1］ FENG Zhengjin. The advance on mechatronic ［J］. Industrial Engineering Journal, 2000,3(1):1-4(in Chinese). ［冯正进.机电一体化技术进展［J］.工业工程, 2000,3(1):1-4.］

[2] ISERMANN R. On the design and control of mechatronic systems - a survey ［J］. IEEE Transactions on Industrial Electronics,1996,43(1): 4-15.

[3] PIL A C, ASADA H H. Integrated structure/control design of mechatronic systems using a recursive experimental optimization method ［J］. IEEE/ASME Transactions on Mechatronics, 1996,1(3):191-203.

[4] LI Ruiqin, ZOU Huijun. Research situation and develop prospect of theory conceptual design of mechatronic products ［J］. Machine Design and Research,2003,19(3):10-13(in Chinese). ［李瑞琴,邹慧君.机电一体化产品概念设计理论研究现状与发展展望［J］.机械设计与研究,2003,19(3):10-13.］

[5] GAO Liji, CHEN Wenqing. The design thinking and methodology for mechatronics technology ［J］. Journal of Institute of Command and Technology,1995,6(2):33-39 (in Chinese). ［高理基,陈文清.机电一体化技术的设计思想和方法学［J］.指挥技术学院学报, 1995,6(2):33-39.］

[6] LI Xuyu, ZHONG Jue. Research of the concurrent technique for complex mechatronic system using multidisciplinary design optimization ［J］. Mechanical and Electronic,2002,(6):29-31(in Chinese). ［李旭宇,钟掘.基于多学科设计的复杂机电系统并行设计方法研究［J］.机械与电子, 2002,(6):29-31.］

[7] ANTHONYA G. Aircraft multidisciplinary design optimization using design of experiment theory and response surface modeling methods ［M］. Blacksburg， VA，USA：Virginia Polytechnic Institute and State University, 1997.

[8] YU Xiongqing, DING Yunliang. Multidisciplinary design optimization a survey of its algorithms and applications to aircraft design［J］. Acta Aeronautica et Astronutica Sinica,2000,21(1):1-6(in Chinese). ［余雄庆,丁运亮.多学科设计优化算法及其在飞行器设计中应用［J］.航空学报,2000,21(1):1-6.］

[9] XING Xiaonan, XU Yuanming, LI Shuo，et al. Application of the neural network reponse surface to aircraft preliminary optimization design ［J］. Machine Design and Research，2004,20(1):68-71(in Chinese). ［邢小楠,徐元铭,李烁，等.神经网络响应面逼近在飞机总体优化设计中的应用［J］.机械设计与研究, 2004,20(1):68-71.］

[10] BIREN P. Review of QFD and related deployment techniques ［J］. Journal of Manufacturing Systems, 1998,17(3):221-234.

[1]	朱天明,武春龙,周有城,张鹏,张小俊. 基于TRIZ功能建模的扩展碰撞预警系统数字孪生概念方案构建[J]. 计算机集成制造系统, 2021, 27(2): 337-351.
[2]	江泽豪,伊德景,朱光宇. 考虑剔除虚假云服务的制造云服务优选[J]. 计算机集成制造系统, 2020, 26(8): 2020-2029.
[3]	刘继红,付超,孟欣佳. 随机与区间不确定性下基于BLISS的多学科可靠性设计优化[J]. 计算机集成制造系统, 2015, 21(第8期): 1979-1987.
[4]	白硕玮,张进生,王志,王经坤. 面向清洁生产工艺方案设计的洁净特征建模与评价技术[J]. 计算机集成制造系统, 2014, 20(7): 1572-1582.
[5]	任水平,刘检华,何永熹,蒋科,郭崇颖. 机械产品多质量要求下的选择装配方法[J]. 计算机集成制造系统, 2014, 20(09): 2117-2126.
[6]	杨春辉，魏军，姚路. 基于质量功能展开和证据理论的复杂装备维修可达性综合评价[J]. , 2009, 15(11): 0-0.
[7]	江志刚，张华，傅成，何彦. 生产过程资源环境属性综合评价支持系统[J]. , 2009, 15(07): 0-0.
[8]	尹超，马春斌，刘飞，尹胜. 车间生产异常事件实时管理系统研究[J]. , 2009, 15(04): 0-0.
[9]	张开富，张杰，李原. 装配工序的多准则群决策协调权评价算法[J]. , 2008, 14(11): 0-0.
[10]	李钢，陈萍，齐二石. 综合评价指标体系设计及其在企业信息化中的应用[J]. , 2008, 14(01): 0-0.
[11]	孟繁晶，邓家提. 合作伙伴的可拓综合评价方法[J]. , 2005, 11(06): 0-0.
[12]	朱永升，韩伯棠，夏平，李振键. 供应链合作伙伴核心竞争力综合评价[J]. , 2004, 10(5): 0-0.
[13]	刘英华，曹健，张申生，张晓光. 可配置模糊综合评价系统研究[J]. , 2004, 10(10): 0-0.
[14]	宁可，李清，陈禹六. 经营过程建模方法评价技术研究[J]. , 2002, 8(10): 0-0.