基于实例和设计目录的微器件原理方案设计

摘要/Abstract

摘要： 提出了将设计目录与基于实例的推理技术相结合的策略，解决了微器件的原理方案设计问题。建立了基于网络的微器件设计目录和实例库，讨论了实例表达、实例检索模型及相似实例检索算法等关键技术。采用多目标模糊综合评价方法进行了方案评价，采用基于框架的方案变换策略进行了方案的修演。开发了软件原型系统，并以微传感器的设计为例，对系统进行了验证。

关键词: 微器件, 设计目录, 方案设计, 实例, 方案评价

Abstract: To solve the problems of principle scheme design for micro-component, the strategy of combining design catalog and Case-Based Reasoning (CBR) was proposed. Micro-component design catalogs based on Web and case bases were established. Some key technologies including case representation, case retrieval model and retrieval algorithm of similar cases were discussed. A multi-objective fuzzy synthetic evaluation method was applied to evaluate scheme solution. The final scheme was achieved by scheme adaptation based on framework. The related software prototype system was developed and validated by micro-sensor design.

Key words: micro-component, design catalog, scheme design, case, scheme evaluation

中图分类号:

闫向彤, ，江平宇. 基于实例和设计目录的微器件原理方案设计[J]. .

YAN Xiang-tong,, JIANG Ping-yu. Micro-component principle scheme design based on case & design catalog[J]. .

参考文献

［1］ ANTONSSON E K.Structured design methods for MEMS［R］. Pasadena, CA,USA:California Institute of Technology,1996.

[2] MCCORQUODALE M S,GEBARA F H,KRAVER K L,et al. A top-down microsystems design methodology and associated challenges ［A］. Proceedings of the Design, Automation and Test in Europe Conference and Exhibition［C］. Los Alamitos, CA, USA: IEEE Computer Society,2003. 292-296.

[3] SILVA M D. Design for manufacturability for 3D micro devices［Z］.Birmingham, Al,USA:NSF Workshop on Three-Dimensional Nanomanufacturing: Partnering with Industry,2003.

[4] WANG Aijun,YU Xiongqing,CHEN Darong.The study of multidisciplinary design methodology to complicated MEMS［J］.Journal of Machine Design,2000,(11):7-9(in Chinese).［王爱俊,余雄庆,陈大融.复杂微机电系统多学科设计方法研究［J］.机械设计,2000,(11):7-9.］

[5] LI Ming,ZHAO Xin,LU Guizhang. Study on virtual design system for MEMS［J］. Information and Control, 2002,31(2):97-101(in Chinese).［李明,赵新,卢桂章.微电子机械虚拟设计系统研究［J］.信息与控制,2002,31(2):97-101.］

[6] Coventor, Inc.. Coventorware software\[EB/OL\].http://www.memcad.com/coventorware/,2004-11-19.

[7] IntelliSense Software Corp.. IntelliSense software\[EB/OL\].http://www.intellisensesoftware.com/,2004-12-20.

[8] GERHARD P, WOLFGANG B, FENG Peien, et al. Engineering design［M］.Beijing: China Machine Press,1992(in Chinese).［Ｇ·帕尔,Ｗ·拜茨著,冯培恩，等.工程设计学［M］.北京:机械工业出版社,1992.］

[9] SHI Ping,FENG Peien,XU Guorong.The development and application of the principle conceptual design catalogues for liquid-liquid separate function［J］. Journal of Engineering Design, 1996,(3):11-15(in Chinese).［师平,冯培恩,徐国荣.液-液分离原理方案设计目录的研制及应用［J］.工程设计,1996,(3):11-15.］

[1]	彭定洪,黄子航,王铁旦,彭勃. 面向云计算部署方案评价的区间犹豫模糊双重妥协评价方法[J]. 计算机集成制造系统, 2021, 27(6): 1768-1779.
[2]	赵燕伟,徐晨,任设东,桂方志,朱芬. 实例检索中基于关联函数和D-HS索引的改进与融合[J]. 计算机集成制造系统, 2021, 27(4): 1108-1119.
[3]	安相华,周立彬,张力伟. 基于粗糙模糊数与耦合分析的产品工艺参数方案绿色优选[J]. 计算机集成制造系统, 2020, 26(11): 3057-3067.
[4]	耿秀丽,王婕. 基于复杂网络和偏好顺序结构评估法的产品服务系统设计方案评价[J]. 计算机集成制造系统, 2019, 25(第9): 2324-2333.
[5]	李玉鹏,吴玥. 基于改进随机多目标可接受度分析的产品服务系统方案评价[J]. 计算机集成制造系统, 2018, 24(第8): 2071-2078.
[6]	胡东方,雷若楠. 基于实例推理与人工免疫系统的工程产品设计方法[J]. 计算机集成制造系统, 2018, 24(第1): 146-153.
[7]	杨延璞,顾蓉,古玉锋. 基于PAM聚类的工业设计方案评价共识度达成方法[J]. 计算机集成制造系统, 2017, 23(第7期): 1386-1393.
[8]	文一凭,窦万春,刘建勋,陈爱民,周旻昊. 安全与成本感知的实例密集型云工作流调度方法[J]. 计算机集成制造系统, 2017, 23(第5期): 955-962.
[9]	马子泰,曹健,姚艳. 云环境下使用竞价实例并考虑中间数据存储策略的工作流调度方法[J]. 计算机集成制造系统, 2017, 23(第5期): 983-992.
[10]	耿秀丽,董雪琦. 粗糙信息公理与云模型集成的方案评价方法[J]. 计算机集成制造系统, 2017, 23(第3期): 661-669.
[11]	周丽蓉,李方义,李剑峰,徐兴硕,李静. 基于设计特征的机械产品制造能耗关联建模[J]. 计算机集成制造系统, 2016, 22(第4期): 1037-1045.
[12]	李静,李方义,周丽蓉,徐兴硕,孟强. 基于BP神经网络的产品生命周期评价敏感性分析[J]. 计算机集成制造系统, 2016, 22(第3期): 666-671.
[13]	耿秀丽,徐士东,叶春明. 顾客需求驱动的产品服务系统模块选配方法[J]. 计算机集成制造系统, 2016, 22(第1期): 55-61.
[14]	安相华,牛春亮,薛冬娟,慕光宇,林晓华. 基于变粒度权重与群决策的产品服务系统方案优选方法[J]. 计算机集成制造系统, 2016, 22(第1期): 155-165.
[15]	敬石开,刘继红,鬲玲,李颖新. 基于文档实例映射的知识地图集成方法[J]. 计算机集成制造系统, 2015, 21(第7期): 1702-1710.