端口－连接型产品配置本体建立与表达

摘要/Abstract

摘要： 针对现有配置本体不能满足配置知识表达需要，以及当前本体建立过程中随意性高的问题，在本体建立过程中引入短语频率分析、矩阵分析、实体－关系图分析等方法，并使用这些可重复、可定量的方法，建立了端口－连接型产品配置本体，用可扩展标记语言的扩展——OWLX (Web ontology language XML presentation syntax)对得到的本体进行了形式化表达。

关键词: 产品配置, 端口－连接模型, 本体, 知识表达<

Abstract: The existing configuration ontology cannot represent configuration knowledge perfectly, and the existing ontology creation process is too subjective. Phrase Frequency Analysis（PFA）, Matrix Analysis（MA） and Entity-Relation Graph （E-R Graph）were introduced during the creation process of configuration ontology for port-and-connector model. So the configuration ontology for port-and-connector model was built up by repeatable and quantifiable method. The designed ontology were represented with Web Ontology Language XML(extensible markup language) presentation syntax (OWLX) which was expanded from XML.

Key words: product configuration, port-and-connector model, ontology, knowledge representation

中图分类号:

TP391.72

尹建伟，杨晗, 董金祥，罗尚虎. 端口－连接型产品配置本体建立与表达[J]. .

YIN Jian-wei,YANG Han, DONG Jin-xiang, LUO Shang-hu. Creation and representation of product configuration ontology for port-and-connector model[J]. .

参考文献

［1］ GRUBER T, OLSEN G R, RUNKEL J T. The configuration design ontologies and the VT elevator domain theory［J］. International Journal of Human-Computer Studies, 1996, 44(3-4):569-598.

[2] SOININEN T, TIIHONEN J, MNNIST T, et al. Towards a general ontology of configuration［J］. Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 1998, 12(4):357-372.

[3] FELFERNIG A, FRIEDRICH G, JANNACH D. Conceptual modeling for configuration of mass-customizable products［J］. Artificial Intelligence in Engineering, 2001, 15(2):165-176.

[4] STEFIK M. Introduction to knowledge systems［M］. San Fransisco, CA, USA: Morgan Kaufmann Publishers, 1995. 608-669.

[5] USCHOLD M, KING M, MORALEE S, et al. The enterprise ontology［J］. The Knowledge Engineering Review, 1998, 13(1):31-89.

[6] GRNINGER M, FOX M S. Methodology for the design and evaluation of ontologies［EB/OL］.http://citeseer.ist.psu.edu/grninger95methodology.html,1995-04-13.

[7] FERNU＇NDEZ M, GU＇ MEZ-PéREZ A, PAZOS J, et al. Ontology of tasks and methods［J］. IEEE Intelligent System and Their Applications, 1999, 14(1):37-46.

[8] NOY N F, MCGUINNESS D L. Ontology development 101:a guide to creating your first ontology［R］. Palo Alto, CA, USA: Knowledge Systems Laboratory,2001.

[9] LU Ruling. Knowledge engineering and knowledge science on the time from old century to new century［M］. Beijing:Tsinghua University Press, 2001. 447-468(in Chinese). ［陆汝铃. 世纪之交的知识工程与知识科学［M］. 北京：清华大学出版社， 2001. 447-468.\]

[10] BERNERS L T, HENDLER J, LASSILA O. The semantic Web［EB/OL］. http://www.scientificamerican.com/article.cfm?chanID, 2001.

[11] HORI M, EUZENAT J, PATEL-SCHNEIDER P F. OWL Web ontology language XML presentation syntax［EB/OL］. http://www.w3.org/TR/owl-xmlsyntax/, 2003.

[12] GRUBER T R. Toward principles for the design of ontologies used for knowledge sharing［R］. Palo Alto, CA, USA: Knowledge Systems Laboratory, 1993.

[13] FELFERNIG A, FRIEDRICH G E, JANNACH D. UML as domain specific language for the construction of knowledge-based configuration systems［J］. International Journal of Software Engineering and Knowledge Engineering, 2000, 10(4):449-469.

[1]	阴艳超,张晟博,廖伟智,徐凯. 资源组件驱动的装配工具匹配推理方法[J]. 计算机集成制造系统, 2021, 27(7): 1981-1992.
[2]	徐赐军,田柳,李炜龙,黄松林. 基于机械结构形态的三维CAD模型检索[J]. 计算机集成制造系统, 2021, 27(6): 1650-1661.
[3]	王昊琪,李浩,文笑雨,罗国富. 本体驱动的复杂产品系统设计信息重用框架[J]. 计算机集成制造系统, 2021, 27(6): 1662-1672.
[4]	刘华一,鄢萍,周强,辛洋,张自凯,潘吉财. 基于语义网的机床故障诊断知识扩展方法[J]. 计算机集成制造系统, 2020, 26(第3): 609-622.
[5]	伊辉勇,张露. 支持在线定制的商品和服务混合配置过程模型[J]. 计算机集成制造系统, 2020, 26(第1): 260-267.
[6]	徐赐军,李炜龙,黄松林. 机械结构形态知识融合[J]. 计算机集成制造系统, 2020, 26(8): 2190-2201.
[7]	安敬民,李冠宇,张冬青,蒋伟. 面向序贯决策中异常情景下交互问题处理方法[J]. 计算机集成制造系统, 2020, 26(12): 3274-3282.
[8]	钟艳如,姜超豪,覃裕初,杨国宇,黄美发. 基于本体的装配序列自动生成[J]. 计算机集成制造系统, 2018, 24(第6): 1345-1356.
[9]	王昊琪,吕振宇,张旭,唐承统. 面向公差分析的几何尺寸和公差语义信息翻译[J]. 计算机集成制造系统, 2018, 24(第4): 994-1006.
[10]	王蕾,夏绪辉,曹建华,刘翔. 再制造服务需求动态获取方法及应用[J]. 计算机集成制造系统, 2018, 24(第3): 781-792.
[11]	阴艳超,常斌磊,姬常杰. 转轮叶片多轴铣削加工的集成知识云服务实现[J]. 计算机集成制造系统, 2018, 24(第2): 349-360.
[12]	施昭,曾鹏,于海斌. 基于本体的制造知识建模方法及其应用[J]. 计算机集成制造系统, 2018, 24(第11): 2653-2664.
[13]	徐赐军,黄松林,王向杰. 机械结构形态提取方法[J]. 计算机集成制造系统, 2018, 24(第11): 2857-2866.
[14]	袁际军,黄敏镁,杨宏林,单汨源. 客户需求动态变更驱动下的产品配置更新建模与优化[J]. 计算机集成制造系统, 2018, 24(第10): 2584-2598.
[15]	文家富,郭伟,邵宏宇. 基于领域本体和CBR的案例知识检索方法[J]. 计算机集成制造系统, 2017, 23(第7期): 1377-1385.