层切法模具粗加工中自适应刀轨规划方法

摘要/Abstract

摘要： 目前，模具粗加工方法是制约模具数控加工效率提高的重要因素，为此，深入探讨了基于层切法的零件模具数控粗加工方法，简述了层切法中计算机辅助设计3维模型分层方法，详细论述了截面上数控加工轨迹生成和规划方法。研究了目前层切法刀具轨迹生成算法的不足，提出了刀具环形轨迹的自适应规划方法。根据层面边界曲率在已有粗加工刀具中自动选择粗加工刀具规格，实现了刀具优化选择的目的。应用该方法可以减少粗加工余量，提高粗加工速度，进一步提高零件模具数控加工效率。

关键词: 刀具轨迹, 3维模型, 数控加工

Abstract: The current method of Numerical Control (NC) rough machining restricts the improvement of die NC-machining efficiency. The method of die NC rough machining based on stratification was studied in particular. In this method, means of three-dimensional Computer Aided Design (CAD) model slicing were introduced briefly. The way of adaptive tool path generation and planning was explicated. Through study of shortcomings of existing tool path generation algorithm, a new adaptive circle tool path generation method was proposed. As the diameter of cutting tool being computed based on the curvature of slicing border, the optimum tool path planning was implemented. By using this method the accuracy and speed of the rough cutting processing was improved. The new method was effective in practice and the efficiency of NC-machining was greatly improved.

Key words: tool path, three-dimensional model, numerical control machining

中图分类号:

TH13

刘伟军，张嘉易，. 层切法模具粗加工中自适应刀轨规划方法[J]. .

LIU Wei-jun, ZHANG Jia-yi,. Adaptive tool path planning of die NC rough machining based on stratifying method[J]. .

参考文献

［1］ZHUANG Haijun,ZHOU Rurong,AN Luling,et al. Automatic tool path generation of three—axis NC rough machining based on solid model［J］.Journal of Computer Aided Design & Computer Graphics, 2003，15(1)：81—84(in Chinese).［庄海军，周儒荣，安鲁陵，等．实体模型的三轴数控粗加工刀轨生成算法［J］．计算机辅助设计与图形学学报， 2003，15(1)：81—84.］

[2] LI Xueyi,WANG Xiaochun,CHEN Song,et al. Rough cutting of sculptured surface built from scattered data［J］. Journal of Computer Aided Design & Computer Graphics, 2003，15(3)：338—342 (in Chinese).［李学艺，王小椿，陈松，等．离散数据复杂曲面的粗加工［J］. 计算机辅助设计与图形学学报， 2003，15(3)：338—342.］

[3] MORRISHIGE K,TAKEUCHI Y．5-axis control rough cutting of an Impeller with efficiency and accuracy［A］．Proceedings of the 1997 IEEE International Conference on Robotics and Automation［C］. Albuquerque,NM,USA:IEEE,1997.1241—1246.

[4] ZHANG Jiayi, LIU Weijun, WANG Tianran．A new offsetting algorithm for directly slicing profile curves in rapid prototyping［A］．Proceedings of 2003 Symposium on Robotics and Manufacturing Science Chinese Academy of Sciences\[C\]. Shenyang:Shenyang Institute of Automation of Chinese Academy of Sciences, 2003.199—204.

[5] LIU Xiangjun,YOU Xinnong.The selection and optimization of cutting tools in dies machining using CNC machine tools［J］. Journal of Huazhong University of Science and Technology, 1996,24(4):51—52(in Chinese).［刘向军，游新农．模具数控加工中的刀具选择优化系统［J］．华中理工大学学报,1996,24(4):51—52.］

[6] TIAN Ying, ZHU Xinxiong. The algorithm of die NC rough machining tool path［J］. Aviation Production Engineering, 1993,(8)：29—37(in Chinese).［田英，朱心雄．模具粗加工刀具轨迹的算法［J］．航空制造工程， 1993，(8)：29—37.］

[1]	吴继春,王笑江,周会成,方海国. 双转台五轴数控机床的非线性误差补偿[J]. 计算机集成制造系统, 2020, 26(5期): 1185-1190.
[2]	彭先龙,韩飞燕,乔心州,王星,寇发荣. 斜齿面齿轮传动齿面主动修形与边缘接触分析[J]. 计算机集成制造系统, 2020, 26(11): 3040-3048.
[3]	肖建新,张辉,李炳燃,李国林. 基于改进圆弧转接的直线段连续过渡算法[J]. 计算机集成制造系统, 2019, 25(第9): 2248-2255.
[4]	刘建康,郝尚华,王树华,富宏亚. 数据驱动的数控加工生产线实时监控与优化控制技术框架[J]. 计算机集成制造系统, 2019, 25(第8): 1875-1884.
[5]	李志明,田梦,王子璇,王晓妍,申利民. 超短脉冲激光器加工工艺参数自适应及其生效技术[J]. 计算机集成制造系统, 2019, 25(第8): 1927-1935.
[6]	徐彦伟,刘明明,陈立海,徐爱军,陈孟会,颉潭成. 中凸变椭圆活塞等体积切除率加工模型及仿真[J]. 计算机集成制造系统, 2019, 25(第10): 2623-2632.
[7]	柴青,仇晓黎,幸研. 基于螺旋升角的零背隙弧面凸轮非等径加工方法及误差研究[J]. 计算机集成制造系统, 2017, 23(第9期): 1869-1874.
[8]	魏涛,张丹,左敦稳,徐锋,夏三星. 面向薄壁多腔类结构件加工特征识别方法[J]. 计算机集成制造系统, 2017, 23(第12): 2683-2691.
[9]	郑祖杰,周敏,郑国磊,朱俊标. 飞机结构件平顶筋顶面骨架分区计算方法[J]. 计算机集成制造系统, 2017, 23(第11): 2407-2413.
[10]	朱虎,井学勇,杨晓光. 数控渐进成形与激光切割集成的板材件加工轨迹生成[J]. 计算机集成制造系统, 2016, 22(第9期): 2145-2152.
[11]	胡泊,富宏亚,韩德东. 基于STEP-NC的数控加工集成化在线检测与监测实现方法[J]. 计算机集成制造系统, 2016, 22(第8期): 1929-1936.
[12]	韩中,汪友明,唐浩漾,孙世新. 基于哈图算法的成型数控加工中心制造过程优化[J]. 计算机集成制造系统, 2016, 22(第6期): 1465-1474.
[13]	孙凯,倪雁冰,王辉,郭小宝,许健. 新型五轴混联机床的后置处理与轨迹仿真[J]. 计算机集成制造系统, 2016, 22(第1期): 265-271.
[14]	王琪瑞,冯毅雄,张子贤,程锦,谭建荣. 基于改进型Butterfly细分的三角网格自由曲面环形刀具轨迹规划[J]. 计算机集成制造系统, 2016, 22(第11期): 2513-2521.
[15]	周青阳,车通,刘日良. 基于STEP的异型螺杆数控加工技术[J]. 计算机集成制造系统, 2015, 21(第5期): 1222-1228.